Hi, I’m new here so sorry in advance if im doing anything wrong.
I need help with the 480 CVBS profile for using with my CRT TV, I’ve researched it already and couldn’t find anything regarding that problem on this version, the issue is that when that profile is applied the image gets a little dislodged to the left as the photo below. My TV is a toshiba 1020, I’m using the system on a TVBOX TX9 with S905W chip. The emuelec version is 3.4.
Thanks in advance any help will be really appreciated.
The images need to be 1024x768, which is the default dimensions of the framebuffer for 480cvbs. <— FOR RECENT VERSIONS.
edit:
Ah hang on did you say version 3.4??? That’s a very old version it uses resolution 1280x960 for the framebuffer, so the splashes should be that size, and check if it works ok.
Thanks, how do i chance that? I’m absolutely noob at this and have no clue.
You can’t change the boot logo size unless you are able to compile your very own Emuelec image. But you can change the look and the size of the launching splash image that appears before loading a game. If you want to do that, the instructions are here: Bezels & Splash screens · EmuELEC/EmuELEC Wiki · GitHub
The problem is not on the boot image, the entire system and games are shown as that with that black bar on the right side.
Hmmm, I see… perhaps you need to update EmuElec. Or check this out, it sounds a little familiar to your problem: CVBS not working on X96 s905W · Issue #49 · EmuELEC/EmuELEC · GitHub
