Hi everyone,
I recently updated my Super Console X2 Pro (Amlogic S905X2 / g12a_s905x2_2g.dtb) to EmuELEC 4.8 and I’m having a severe display scaling/overscan issue.
When I set the resolution to 1080p @ 60Hz, the image is cut off around the edges (zoomed in).
-
My TV doesn’t have a dedicated “Just Scan” or “Overscan OFF” toggle; it only lets me change the aspect ratio between 4:3, 16:9, Zoom 1, and Zoom 2, but none of these options fix the cutoff.
-
The only temporary workaround that displays the full screen is dropping the resolution down to 1280x768, but the drop in image quality is terrible.
-
I tried messing with some video settings inside the CoreELEC/EmuELEC Danger Zone menu to force a custom viewport, but I ended up messing up the configuration completely.
Since I can’t fix it from the TV side, is there a reliable way via SSH or by editing the config.ini / boot.ini / ee_settings.txt files to manually force a screen offset calibration or fix this resolution mismatch on EmuELEC 4.8? Also, how can I reset the Danger Zone display settings back to default without doing a full reinstall?
Thanks in advance!
Hola a todos:
Hace poco actualicé mi Super Console X2 Pro (Amlogic S905X2 / g12a_s905x2_2g.dtb) a EmuELEC 4.8 y tengo un problema grave con la escala de la pantalla y el sobreescaneo (overscan).
Cuando configuro la resolución a 1080p a 60Hz, la imagen se corta en los bordes (se ve con un zoom excesivo y no se alcanzan a ver los límites de la pantalla).
-
Mi televisor no tiene una opción dedicada para desactivar el overscan (como “Solo escaneo”, “Ajuste de pantalla” o “Just Scan”); solo me deja cambiar la relación de aspecto entre 4:3, 16:9, Zoom 1 y Zoom 2, pero con ninguna de estas opciones se corrige el recorte.
-
La única solución temporal que me funciona para ver la pantalla completa es bajar la resolución a 1280x768, pero la pérdida de calidad de imagen es terrible.
-
Intenté mover algunos ajustes de video dentro del menú Danger Zone de CoreELEC/EmuELEC para forzar un área de visualización personalizada, pero terminé estropeando la configuración por completo.
Como no puedo solucionarlo desde el lado del televisor, ¿hay alguna manera confiable mediante SSH o editando los archivos config.ini, boot.ini o ee_settings.txt para calibrar manualmente el margen de la pantalla o corregir este desajuste de resolución en EmuELEC 4.8? Además, ¿cómo puedo restablecer los ajustes de pantalla de Danger Zone a los valores por defecto sin tener que reinstalar todo desde cero?
¡De antemano, muchas gracias por su ayuda!