# GPIOnext on Emuelec / Radxa Zero

**URL:** <https://emuelec.discourse.group/t/gpionext-on-emuelec-radxa-zero/1483>\
**Category:** Amlogic Devices\
**Created:** [November 22, 2022, 11:32am UTC](https://emuelec.discourse.group/t/gpionext-on-emuelec-radxa-zero/1483 "2022-11-22T11:32:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![greggyz](https://avatars.discourse-cdn.com/v4/letter/g/e0b2c6/32.png) [@greggyz](https://emuelec.discourse.group/u/greggyz)\
**Post date:** [November 22, 2022, 11:32am UTC](https://emuelec.discourse.group/t/gpionext-on-emuelec-radxa-zero/1483/1 "2022-11-22T11:32:20Z")

</div>

Successfully built a prototype game console on raspberry pi zero. Now I would like to move to radxa but when I run GPIOnext/install.sh after cloning github there is an error saying sudo is unnecessary etc. I suspect GPIOnext project is incompatible with Radxa and I would like to know how you people go around this issue when migrating. I need EMUELEC to recognize my GPIO based input, which works perfectly in Retropie.

> **[GitHub - mholgatem/GPIOnext: The next evolution of GPioneer! Create virtual...](https://github.com/mholgatem/GPIOnext)**
>
> The next evolution of GPioneer! Create virtual gamepads with your GPIO pins! - GitHub - mholgatem/GPIOnext: The next evolution of GPioneer! Create virtual gamepads with your GPIO pins!

Thank you.