# GameCube settings **URL:** \ **Category:** General\ **Created:** [March 5, 2022, 11:45am UTC](https://emuelec.discourse.group/t/gamecube-settings/971 "2022-03-05T11:45:30Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![Langerz82](https://avatars.discourse-cdn.com/v4/letter/l/bc79bd/32.png) [@Langerz82](https://emuelec.discourse.group/u/Langerz82)\ **Post date:** [March 5, 2022, 11:24pm UTC](https://emuelec.discourse.group/t/gamecube-settings/971/10 "2022-03-05T23:24:50Z")
I think it’s useful for flycast SA so yeah go ahead. You can always change the settings for flycast by pressing select and going through the menu. Note - emu.cfg goes here: Flycast (/storage/.config/flycast/emu.cfg) Hey, regarding dolphin I found some useful settings here: > [@\[EE 4.4\] DolphinSA capping FPS to 30?](https://emuelec.discourse.group/t/ee-4-4-dolphinsa-capping-fps-to-30/970/2): > > Ok I think I have a kind of workaround that makes the 3D processing half the vertical refresh rate. By under-clocking the threads a small amount, enough for it to drop the display frames from 60 to 59 and by enabling vertical-sync it will fall back to half it’s refresh rate to maintain the screen sync. So heres how to do it: In Dolphin.ini, under [Core], look for Overclock and OverclockEnable and set too: Overclock = 0.97000000 OverclockEnable = True Also if your sound sounds a bit clippy, u… --- _[View the full topic](https://emuelec.discourse.group/t/gamecube-settings/971)._